There might be a load of paper jam debris blocking the mechanism from reaching its port.Carefully turn the cogs to move the ink cleaning mechanism.Opened the cover and checked the front right of the printer near the waste ink pads.You can either reset the error or try and clean the printer from inside which might be causing the problem. These are the instructions which worked for me on my Canon pixma ip470 and has work on many other Canon models: You can remove the top of the printer to remove and clean the pad or reset the printer and continue without cleaning. (When the operation completes, the printer returns to the menu selection mode automatically.) (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)ĥ) Press the Power button. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.Ĥ) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Do not release the Power button.)ģ) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. The LED lights in green to indicate that a function is selectable.)Ģ) While holding the Power button, release the Resume/Cancel button. While pressing the Resume/Cancel button, press the Power button. These are the instructions which worked for me on my Canon pixma mp470:ġ) Close the print head cover, and turn off the printer. attempt to clean it yourself, or what I did without problems on my MP470, 3. take to service center to have it cleaned, 2.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |